Showing posts with label In Box Review. Show all posts
Showing posts with label In Box Review. Show all posts
Wednesday, January 26, 2022
Airfix 1/72 DeHavilland Mosquito B.XVI
Thursday, January 13, 2022
Vampy is a Fine Girl
My review of the Special Hobby DH.100 Vampire F.3 “European and American Operators” has been posted over at Model Paint Solutions.
Monday, December 20, 2021
Vargas Scale Models 1/72 Christie Tank M1921
A Steampunk kinda WW1 tank? Have I lost my mind? My review of the Vargas Scale Models 1/72 Christie Tank M1921 has been posted over at Model Paint Solutions.
Tuesday, June 29, 2021
Sword 1/72 TBF-1 Avenger “Over Midway and Guadalcanal”
The Avenger? No, no, not the comic book, the Turkey. My review of the new Sword 1/72 TBF-1 has been posted over at Model Paint Solutions.
Tuesday, May 18, 2021
Special Hobby 1/72 Harvard Mk. IIB
Thursday, April 29, 2021
Hobby Boss 1/72 Bearcat inbox
A few weeks ago the new Hobbycraft 1/72 F8F-1 Bearcat arrived in the mail. It is one of their Easy Assembly kits and pretty simple. The cockpit is modeled as part of the fuselage and the engine is integral with the cowl. (These are impressive moldings...I just wish the engine and cowl were separate pieces.) Gear and wheels are also one part, but there is decent detail in the wheel wells. It looks simple to assemble, is well molded, and a test fit shows good fit. Dr. Strangebrush from Model Paint Solutions pointed out something is quite right with the shape around the tail fillet...Hobby Boss didn't get the transition between the fillet and the rear fuselage quite right. In my opinion, it isn't a dealbreaker, but John did notice it right away. Decals are provided for the Beatle Bomb and a VF-3 Bearcat. I'll let the pictures do most of the talking and report back when it is finished.
I'm not sure what to think about this one. It would make a perfect starter model and it certainly will assemble quick and easy for us colour and markings guys. But I don't love the integral landing gear and wheels and I'm still not sure how I'll paint the engine. For those of use that are lazy it is probably the best Bearcat in 1/72. For those that love detail and want a bit better shape accuracy look for the defunct Attack Squadron Bear in resin or the Sword or Art Model short run kits.
Saturday, February 1, 2020
Zvezda 1/72 British Bofors 40-mm MkI/II AA-Gun
Like many of my boondoggles, I blame this one on David M. Knights, Esq. He had mentioned that fellow modeler Mike Baskette was doing a retro build of the recently reissued Airfix 1/76 Bofors 40mm Gun and Tractor. I remember building the kit…in an MPC box..in high school and the discussion reminded me of the, probable apocryphal, story of the Canadian Forces pillaging museums, CFB Baden–Soellingen, and CFB Lahr for Bofors guns to refit Canadian Navy ships during the Gulf War. As much as the idea of building the Airfix kit again was of some interest, I’ve never warmed to 1/76 scale, so I searched out an actual 1/72 Bofors gun. And said search turned up this kit. Quickly ordered, I was impressed with what was in the box when it arrived. I guess it is part of Zvezda’s series of kits for war gamers, but it also looked like a nice model.
So, to return to the story of Bofors guns defending Canada’s German air bases during the Cold War...it is indeed true. They were 40mm Bofors guns, but on what is called a Boffin mount removed from RCN ships. So I can’t use this kit for that, but I did find a nice photo of a Bofors on exercise on the West Coast to keep Vancouver safe from Japanese air attack. That will be my subject, if only I could find a 1/72 dog to add to the vignette!
![]() |
| City of Vancouver Archives # CVA 1184-629 captioned "Men firing a Bofors 40 mm ack-ack anti-aircraft gun at University Point." |
Monday, July 8, 2019
Reed Oak 1/72 RAF figures
Once again, the most excellent proprietor of Model Paint Solutions, Dr. Model Paint (aka John Miller), has posted one of my articles. However, in the editing process one of the figures was dropped from contention; the RAF WAAF. To make amends, I have posted some photos of the unprepared WAAF figure. It is hard to express just how impressive the detail is on these figures.
Thursday, March 1, 2018
Saturday, June 23, 2012
Hobbycraft Avro Arrow
Over that last year or so, it has been interesting to read online "experts" write about how Hobbycraft of Canada is "kaput" or has gone out of business. I'm sure if they were paying attention, or cared about 1/72 scale, they would have been shocked to learn of this new tool Avro Arrow. One of the first kits issued by Hobbycraft in the 1980s was an 1/72 Arrow; sadly it was less than spectacular in shape and detail and was underscale. It was retooled a few years later to correct the most glaring of mistakes, but was still too small to accurately considered a 1/72 scale model.
So now we have a brand new kit. Overall it is a huge improvement over the earlier kit, and seems to bear quite a resemblance to the 1/48 scale retool from 2002/2003. Detail is still sparse, but much better than the earlier kit, and the engraved lines are a tad soft. There is a nice inbox and build review here. While I laugh that the poster considers the box art a con...really who cares, the drawings look like an Arrow...I agree with his comments about the horrible instructions (odd looking and many mis-numbered parts) and red ensign on the decal sheet. Also, he is quite correct that the kit is overpriced. I paid $30 (Canadian) for mine, and while it is a decent kit and a huge improvement over any other injected plastic Arrow, it does not compare well to certain other kits in its price bracket. Now how about a retool of the CF-100?
Look for this one to hit the workbench soon...I hope...
Thursday, May 3, 2012
Sword 1/72 Seafire Mk. IIc/L Mk. IIc
Sword is another Czech producer of injection molded kits and they followed up their recent Spitfire Vc series with a Seafire Mk. IIc. It includes one sprue from the Spitfire kit along with a new sprue of Seafire specific parts, some resin cannons and fairings, and an injection modeled canopy. Sword is quite a refined producer of short run models and the parts are well molded with clean detail. Options abound with two sets of wheels, two choices for wingtips, three spinners and propellors, and the choice of the standard or tropical filters. Scribing is very fine, maybe too fine for some modelers. Detail in the cockpit is very nice and it looks like it will assemble just fine if you take some care. Sword did account for the difference between the Spitfire and Seafire by providing a new sprue, including a Seafire fuselage and also provide plastic parts for the hook and fairing.
Decal options are for 899 Squadron of the HMS Indomitable, 885 NAS in Northern Ireland, and 834 Squadron of the HMS Battler of the British Pacific Fleet with a cartoon stork nose art. All necessary markings, including stencils are provided.
The Sword Seafire is an expensive kit, with a price over $20.00, but it is the best 1/72 plastic Merlin engined Seafire currently on the market.
Tuesday, February 14, 2012
Some New Plastic - Halifax and Swordfish

I gave in and actually got some new plastic last week, the new Airfix Swordfish and the new-tool Revell Halifax. The Swordfish is just about perfect, everything a model should be. Well molded, well detailed, and not too expensive at about $15. A home run. Sadly, the Halifax has some issues. Even with just a glance you can see that the spinners and engine radiators are ginormous, and the props aren't even close. (The four bladed props look very Mustang.) The word on the net is that the nacelles are overall too large. I was also disappointed that Revell did not include the Z Nose as seen in test shots. The fuselage looks good, and their is decent detail, but those engines... (The icing on the cake is that the drawings on the decal placement guide have the correct shaped spinner and props.) I hear Freightdog Models is going to do some new resin props, spinners, and radiators that may just make the thing look decent. Won't make it totally accurate, but might be close enough for me.
Monday, February 6, 2012
Forces of Valor/Unimax U.K Spitfire Mk. IX

It is always an exciting day when a new 1/72 Spitfire hits the shelves. While the world is not exactly in need of another new Spitfire kit, I look forward to viewing the new plastic. Sadly, this was a day I should have stayed in bed.
I'm not exactly sure who Forces of Valor are, but I think they have something to do with wargaming or diecasts; though this plastic kit is one of the start of a new series of 1/72 World War Two fighters. Opening the box finds four bagged sprues of grey plastic, one clear sprue, a decal sheet with one option, and an instruction sheet. One feature that immediately catches the eye is the open engine compartment...but immediately after that things start to go wrong...
It is not often that I find myself looking at a new kit and wondering what the design team was smoking. In this case it must have been some damn good quality hallucinogens, because even on cursory inspection this thing bares only a slight resemblance to a Spitfire. The rear fuselage and rudder are...well not Spitfire like at all. Maybe they look better on mushrooms?

The underwing radiators are huge. The wing is supposed to be a "c" wing with the large cannon blisters, but then they give you bomb racks usually seen on later models. (And those racks are crude and way outboard of where they should be on the wings.) The bombs themselves look more like fishing sinkers.

The scribing is deep with some odd raised areas and rivets. The cockpit detail is a figment of someones imagination, and only includes a seat, floor, and instrument panel. The exposed engine's resemblance to a Merlin depends on how much you squint. Heck, you are probably better off just closing your eyes entirely.
The canopy is thick, misshapen...surprise, eh...and looks huge. Ugh. There are huge locating pins and holes on almost every part and it almost looks like a snap-tite, but the box says glue is necessary. The instruction sheet may be the highlight of the kit, and quite honestly I was so appalled by the plastic I couldn't bring myself to look at the decals.
This kit is bad. Actually beyond bad...aweful, so much so that I can't understand who the market for this kit is. Yes, it was cheap...under $10...but honestly Forces of Valor/Unimax should pay me for the pain and suffering I suffered by opening the box. Stay away!
Sunday, September 25, 2011
Latest from 3D-Kits.co.uk
After releasing a very nice Spitfire II conversion 3D-Kits.co.uk are back with two new packages.
First off we have the Spitfire Mk. II LR conversion kit which consists of a two part injection molded fuel tank which fits under the port wing of the Spitfire and a small decal sheet with two options, a rather bland aircraft of 66 Squadron, and the appropriately punny "Counter Attack" of 152 Squadron that was funded by NAFFI. (Not a hard decision as to which one I will build.) The small decal sheet has only the codes, serials, and nose art, so roundels, fin flashes, and stencils will need to be sourced from the kit decal sheet. The injection molded tank is perfectly molded and with the decals included, makes this a very simple conversion which will help destroy the good looks of the new Airfix Spitfire.
The other packet is a set of two Vickers S guns to convert any Hurricane IIc kit into a Hurricane IId. In this set a small decal sheet is included for two 6 Squadron aircraft in the desert scheme and a day fighter scheme Hurricane from the 1st Specialized Low Attack Instructors School. Again only the individual markings are included and you are on your own for roundels and fin flashes. This conversion is slightly more complicated than the Spitfire LR and will involve some sanding and filling of the IIc wing of whichever kit you choose to use. The guns are beautifully molded and can be fitted either exposed or with the more common fairings. Also included are two ammo boxes for the diorama fans. Really, really nice, and while both the old Airfix and Matchbox kits included the IId option, there is no comparison. These are some really nicely molded guns. It is hard not to reach for a Revell Hurricane and start building.
It really is amazing to see a small company issuing full run injection molded conversions in this day and age. These parts are on par with anything from a major manufacturer. If the topics interest you, treat yourself to one or both. Now how about some Hurricane IV radiators?
Sunday, June 12, 2011
A-Model F4F-3S Wildcatfish In Box Review

I don't know what it is about the Grumman Wildcatfish that attracts me so much. Sure I am a Wildcat fan, but no Canadian service ever operated the Wildcatfish. Maybe it is just the irony of putting on fighter on floats...and more, so putting a pudgy fighter on floats. Anyway, I'd always wanted to build a Wildcatfish, but I'm not sure that there were many options in 1/72. That has now changed.
Boxed by A-Model, I think this kit originates from their Master 44 design bureau. (Well at least that is what the sprues say.) The kit has four grey sprues and one clear sprue. The molding is quite well done for a short run kit with small sprue attachment points and little flash, but the detail is crude. In fact this kit looks totally 1970s. The first sprue includes the four floats which have almost no surface detail. The wing spure has nicely scribed lines, a few engraved rivets, and restrained fabric detail. The fuselage sprue also contains the engine and cockpit details. Again, the fuselages parts are nicely done, but the engine and cockpit detail is poor. Cockpit detail consists of a floor, small instrument panel, control column, backrest and seat bucket. Not accurate and not well done. The propellor is ok, but the engine would embarrass 60s Airfix kits. The last sprue contains the beaching gear and float supports. Again, pretty well modeled with minimal flash, but crude detail. The clear canopy looks funnily shaped to me, is thick, with poorly defined frame lines and some dimples. Not at all state of the art. Finally, you get a small decal sheet with 6 stars for the one option in USN Blue Grey over USN Light Grey. Oddly the instructions tell you to paint the underside white rather then grey.
Nothing about this kit is state of the art, except for the price. At almost $30, you better really want a Wildcatfish and be prepared for a crude 70s style kit. Maybe the best option is consider it a conversion and kitbash it with a Hasegawa Wildcat, or at least steal an engine, prop, and canopy from Hasegawa and add a True Details cockpit. But that would be one expensive model.
So now what? Do I build it as it was tested in Bethpage, or do I just throw caution into the wind and build a what-if Canadian Wildcatfish. Because, really, the RCAF should have purchased them to defend Canada and allow the senior pilots to go on fishing trips in style.
Friday, April 22, 2011
Admiral 1/72 Seafire Mk. IB Vokes

One of the kits I picked up at the Pittsburgh regional was the newly issued Admiral Seafire IB. Admiral is now an imprint of AZ Models and this kit is another boxing of the AZ Spitfire family. While from the same masters as the earlier Spitfire I series, all the necessary changes to build a "b wing" Spitfire V have been made. The kit is pretty much a early generation short run product. With a little clean up most of the parts will be quite usable and the scribing is very fine and petite, maybe too much so. Shape looks pretty good. The canopy is injected and a little thick and cloudy. Cockpit detail is good for the scale, and unlike the Spitfire I kit the seat is usable. Options include clipped, standard, or extended wing tips, standard or Vokes filters, and either the Rotol or de Havilland spinners and blades. (Oddly a four bladed spinner is included, but the appropriate blades are not provided. There are four Rotol blades, but to the best of my knowledge the Spitfire VI did not use this style of Rotol blades.)
As AZ are trying to get as much out of the molds as possible, the kit has some odd quirks. For example the intake scoop of the Spitfire VI is molded on the fuselage. (The instructions do mention to remove this.) In addition, in the ongoing poor use of photo-etch in modern kits, the fuselage antenna is provided on the PE fret. Great. A flat piece of metal to represent a 3-D object. Also, the Seafire hook conversion is in PE which needs to be bent to create the hook. Again this if far from an ideal choice of material and not really much of a conversion.
Two decal sheets are provided. One for stencils, and one for the two markings options. These include Duncan Hamilton's Royal Blue station hack and a standard aircraft from 885 Squadron in the Temperate Sea Scheme.
Overall I'm a little disappointed in the kit. First off it was expensive, at $20. Also, while AZ has some interesting subjects their modelings just aren't top of the line. They remind me of MPM/Special Hobby kits of over a decade ago. That combined with the silly choice of materials and the half hearted Seafire conversion, make this a less then a great value. When all is said and done, I'll probably try to find some new propellor blades and build the kit as a high altitude Spitfire VI as operated by 417 Squadron.
Monday, December 21, 2009
Airfix SHAR and SHAR2
Buried under the snow, I found a nice surprise on my doorstep Saturday. The new Airfix Sea Harrier FRS.1 and F/A.2. The FRS.1 was immediately dispatched to the closet of no hope, but the F/A.2 was torn into with relish. I've been waiting years for a divine scale SHAR2 that was actually buildable and after spending too much money on resin conversions for the ESCI and Hasegawa Sea Harrier kits and the horrid Xtrakit rush job (and I passed on the Special Hobby kit which was the Xtrakit model with additional detail parts), I think this one will actually get built.
In typical current Airfix style it is a simple kit with deep panel lines, and decent moldings. The moldings are not quite as crisp as the recent Spitfires and Hawks and the plastic is softer. (Looking at the side of the box, these kits were molded in India, rather then China. I think that is a first for me...a model injected in India.) The good news is that all the F/A.2 mods are included. The longer fuselage with the new nose are captured well. The fin mounted pitot tube is included, even if it would be best to replace it with a length of metal for strength. The wings also have the necessary F/A.2 modifications.
Cockpit detail is a tub, instrument panel with combing, but no heads up display, a stick, a rather small seat and a World War two style pilot. (Oddly the Spitfires had a jet pilot...oh...oh...) I planned to fit an Aeroclub white metal Martin Baker Mk.10 seat, but there is not enough room in the tub and the white metal seat is way too tall. Decals are included for the panel and consoles as there is no raised details.
Weapons include Aden gun pods, the larger F/A.2 tanks, dual Sidewinders, AMRAAMs, and Sea Eagle anti-ship missiles. (I don't think the F/A.2 carried Sea Eagles.) Sadly, while the boxart shows the fuselage mounted AMRAAMs, the pylons are not included in the kit. Bummer.
The airbrake may be position opened or closed, and both open and closed auxiliary intake doors are provided. (These should be open on the ground, though most kits mold them closed) There is some detail inside the landing gear wells, but also some injection pins molded into the detail. Also included is a nice engine fan for the intake. The exhaust nozzles are molded in two pieces each and may be difficult to make look good if the fit is anything other then stellar. The main gear wheels are slightly over bulged for my taste. The canopy looks clear and well molded, if a little thick.
Decals are provided for 800, 801, and 899 Squadrons Fleet Air Arm in overall Medium Sea Grey. The decals look very well printed, and stenciling is included. As is becoming the norm, a full colour decal placement sheet is included for each option.
I'm too lazy to get some sprue shots, but you can find theme here and here.
Again, we have a nice buildable new kit from Airfix. Yes it could use a little resin and photoetch for additional detail, but for a reasonable price a nice base is provided out of the box. It is not state of the art, but it does seem like it will be a quick build. It surely beats the socks off the competition.
In typical current Airfix style it is a simple kit with deep panel lines, and decent moldings. The moldings are not quite as crisp as the recent Spitfires and Hawks and the plastic is softer. (Looking at the side of the box, these kits were molded in India, rather then China. I think that is a first for me...a model injected in India.) The good news is that all the F/A.2 mods are included. The longer fuselage with the new nose are captured well. The fin mounted pitot tube is included, even if it would be best to replace it with a length of metal for strength. The wings also have the necessary F/A.2 modifications.
Cockpit detail is a tub, instrument panel with combing, but no heads up display, a stick, a rather small seat and a World War two style pilot. (Oddly the Spitfires had a jet pilot...oh...oh...) I planned to fit an Aeroclub white metal Martin Baker Mk.10 seat, but there is not enough room in the tub and the white metal seat is way too tall. Decals are included for the panel and consoles as there is no raised details.
Weapons include Aden gun pods, the larger F/A.2 tanks, dual Sidewinders, AMRAAMs, and Sea Eagle anti-ship missiles. (I don't think the F/A.2 carried Sea Eagles.) Sadly, while the boxart shows the fuselage mounted AMRAAMs, the pylons are not included in the kit. Bummer.
The airbrake may be position opened or closed, and both open and closed auxiliary intake doors are provided. (These should be open on the ground, though most kits mold them closed) There is some detail inside the landing gear wells, but also some injection pins molded into the detail. Also included is a nice engine fan for the intake. The exhaust nozzles are molded in two pieces each and may be difficult to make look good if the fit is anything other then stellar. The main gear wheels are slightly over bulged for my taste. The canopy looks clear and well molded, if a little thick.
Decals are provided for 800, 801, and 899 Squadrons Fleet Air Arm in overall Medium Sea Grey. The decals look very well printed, and stenciling is included. As is becoming the norm, a full colour decal placement sheet is included for each option.
I'm too lazy to get some sprue shots, but you can find theme here and here.
Again, we have a nice buildable new kit from Airfix. Yes it could use a little resin and photoetch for additional detail, but for a reasonable price a nice base is provided out of the box. It is not state of the art, but it does seem like it will be a quick build. It surely beats the socks off the competition.
Friday, October 19, 2007
Trumpeter 1/72 Fairey Gannet - Part One
When Trumpeter announced its imminent release of a 1/72 Fairey Gannet in 2006, U.S. modelers were left with two questions:
1. What is 1/72 scale?
1. What is 1/72 scale?
2. What is a Fairey Gannet?
Well I can assure you that even though the Fairey Gannet looks like somebodies idea of an aeronautical joke it is indeed very real. And yes Mark Smith, 1/72 scale is not dead.
Those of us with a more Commonwealth bent were excited by the announcement of a Gannet as Trumpeter had recently released a stunning Wyvern that may be one of the best 1/72 scale kits ever. Not to mention the only previous Gannet in the scale was a Frog example from the 1950s. It contained about 7 pieces and featured quicksand pilots on flat surfaces and no wheel wells. Frog were kind enough to include landing gear and a clear canopy, so I guess we should have been somewhat thankful. Test shots of the new kit soon surfaced on the net and it looked like the hopes of a Gannet to Wyvern standards were dashed. The kit appeared to be nice, but not stunning. Who needs bomb bay detail and folding wing options anyway? (Well I’d have liked the option...but heck what do I know?) Plus a few Germans could be heard chanting “Wait till 2007. Revell AG will answer your Gannet prayers. Wait till 2007!”I’ve never really understood German and Revell AG said nothing about a Gannet so we all wondered what the Germans were so excited about.
Late in 2006, after the exchange of way too much cash my Gannet arrived in the mail. The large box was torn open post haste and at first glance the Gannet looked nice. From about two feet the molding and surface detail looked good. Much as in the case with my models, moving in closer did not flatter the new kit. Detail is sparse. The cockpit has lots of parts, but all interior surfaces are flat, no molded in detail what so ever. Main gear wells are devoid of detail. The surface detail is ok. Some of it is quite fine, but lines tend to just end near joint lines and not continue over the joint. There is flash and especially injector pins everywhere. The clear parts are very thick and have a huge seam line running down the center. Well this might take a while... That night I visited the Green household and Rick was awed by the kit. Well what do expect from a guy who builds biplanes? Anyway, I started assemble right away. Dry fits did not look promising. Filler would be necessary, especially with the nose/cowling piece and the insert for the under fuselage radome. And whose idea was it to put a huge injector pin in the center of the nose gear well. Hey someone actually put detail there...did you have to ruin it? Decals are provided for two Fleet Air Arm and a German option. They look ok, but one of the stencils has a very unique warning. It reads “DANGER - KEEP OFF - THE SPASSERS WILL BE PROSECUTED.” So watch out spassers...Trumpeter has warned you! I was disheartened and returned home thinking that maybe those Germans were right...
Late in 2006, after the exchange of way too much cash my Gannet arrived in the mail. The large box was torn open post haste and at first glance the Gannet looked nice. From about two feet the molding and surface detail looked good. Much as in the case with my models, moving in closer did not flatter the new kit. Detail is sparse. The cockpit has lots of parts, but all interior surfaces are flat, no molded in detail what so ever. Main gear wells are devoid of detail. The surface detail is ok. Some of it is quite fine, but lines tend to just end near joint lines and not continue over the joint. There is flash and especially injector pins everywhere. The clear parts are very thick and have a huge seam line running down the center. Well this might take a while... That night I visited the Green household and Rick was awed by the kit. Well what do expect from a guy who builds biplanes? Anyway, I started assemble right away. Dry fits did not look promising. Filler would be necessary, especially with the nose/cowling piece and the insert for the under fuselage radome. And whose idea was it to put a huge injector pin in the center of the nose gear well. Hey someone actually put detail there...did you have to ruin it? Decals are provided for two Fleet Air Arm and a German option. They look ok, but one of the stencils has a very unique warning. It reads “DANGER - KEEP OFF - THE SPASSERS WILL BE PROSECUTED.” So watch out spassers...Trumpeter has warned you! I was disheartened and returned home thinking that maybe those Germans were right...
As I write this missive, I’ve started painting the cockpit and assembling the wings. Looks like filler will be necessary on most joints. At this time I’m going to ignore the lack of cockpit detail...it is painted all black in there anyway. The flaps are meant to be installed extended and again are devoid of detail. Not to mention you don’t see many pictures of Gannets with the flaps open on the ground, so I may see if they will fit retracted. I’m disappointed with the kit, but since then I’ve also purchased the trainer version and an Xtradecal decal sheet, so it appears I will be fighting with these kits for a little while. I will report back with Part Two when/if I actually finish the thing. Just don't expect Part Two any time soon...
I’m glad that we have a newer Gannet kit, but I wouldn’t call it state of the art... I just wish that the good Trumpeter tool guy made this kit, not the less interested in his work guy. Not to mention with a price over $20 for a 1/72 prop, I expected more. Since the kit wasreleased Revell AG have indeed announced a new Gannet for release in 2007 or 2008, so my suggestion is that you may want to wait a little while. Revell AG do excellent work and it wouldn’t be hard for them to trump the Trumpeter kit and offer their version at a much better price with more detail and better moldings.
Sunday, September 16, 2007
Trumpeter 1/72 Hawker Sea Fury FB.II
The Sea Fury is my all time favorite aircraft and I've long wanted a kit I could actually finish and be happy with. I built a PM kit when it was released in the 80s and even as a younger modeler I was less then impressed with it. The High Planes kit looked difficult and for some reason the Special Hobby never made it to the bench. I was excited when Trumpeter announced a new 1/72 Sea Fury, but my excitement was tempered by their lackluster Fairey Gannet. I kept wondering if Trumpeter would equal their stunning Wyvern and make the Sea Fury kit of my dreams?
Is this the Sea Fury of my dreams? Well yes and no. It is nice. The parts are molded in the typical Trumpeter grey plastic. The molding is ok, there is a little flash, and the usual mold lines to be removed. The exterior surface detail is very very nice. Crisp finely engraved panel lines and no rivets. A quick test fit shows that overall the fit will be ok, but some filler will be required. The separate folding wings are a nice option, but they always leave me worried they will not fit well in the extended position. Looks like that is the case here. Cockpit detail is better then the Gannet, but not up to the standard of the Wyvern. The wheel wells have some nice detail, but as usual with Trumpeter kits, are marred by ejector pins. The landing gear doors suffer the same malady. The clear parts are thin and clear, but with a mold line right down the center that will need to be removed. Some lame rockets, and nice tanks are the underwing stores. The decal options...are surprise, surprise...the 802 Squadron "Mig Killer" from Korea...blah...and a bird from 1831 Squadron with ST tail codes and a yellow and red fuselage band. Both options are in Extra Dark Sea Grey over Sky. No Canadian option is offered, but you RCN fans need to keep your eyes on Mike Grant's site for a new sheet with quite a few Canadian options.
Mike Grant Sea Fury decals
Some have stated that the prop appears a little anemic and that the landing gear may sit a little to low, or two high, depending on who you listen to. I'll reserve judgment until I finish my model.
Overall, the Trumpeter kit is nice, but I expected better for the price. (Retail is an almost shocking $25.00!) Maybe my expectations were too high, but I think the Academy Typhoon is a better kit then the Trumpeter Sea Fury at half the price. Sadly the Academy Typhoon is a Typhoon and not a Sea Fury.
This may be the Sea Fury kit of my dreams:
Aki Products 1/72 Sea Fury
Too bad I'm not a millionaire...
Is this the Sea Fury of my dreams? Well yes and no. It is nice. The parts are molded in the typical Trumpeter grey plastic. The molding is ok, there is a little flash, and the usual mold lines to be removed. The exterior surface detail is very very nice. Crisp finely engraved panel lines and no rivets. A quick test fit shows that overall the fit will be ok, but some filler will be required. The separate folding wings are a nice option, but they always leave me worried they will not fit well in the extended position. Looks like that is the case here. Cockpit detail is better then the Gannet, but not up to the standard of the Wyvern. The wheel wells have some nice detail, but as usual with Trumpeter kits, are marred by ejector pins. The landing gear doors suffer the same malady. The clear parts are thin and clear, but with a mold line right down the center that will need to be removed. Some lame rockets, and nice tanks are the underwing stores. The decal options...are surprise, surprise...the 802 Squadron "Mig Killer" from Korea...blah...and a bird from 1831 Squadron with ST tail codes and a yellow and red fuselage band. Both options are in Extra Dark Sea Grey over Sky. No Canadian option is offered, but you RCN fans need to keep your eyes on Mike Grant's site for a new sheet with quite a few Canadian options.
Mike Grant Sea Fury decals
Some have stated that the prop appears a little anemic and that the landing gear may sit a little to low, or two high, depending on who you listen to. I'll reserve judgment until I finish my model.
Overall, the Trumpeter kit is nice, but I expected better for the price. (Retail is an almost shocking $25.00!) Maybe my expectations were too high, but I think the Academy Typhoon is a better kit then the Trumpeter Sea Fury at half the price. Sadly the Academy Typhoon is a Typhoon and not a Sea Fury.
This may be the Sea Fury kit of my dreams:
Aki Products 1/72 Sea Fury
Too bad I'm not a millionaire...
Subscribe to:
Posts (Atom)










